Přepínače HP ProCurve

ProCurve Networking Switch 2510 Series overview

• Reliable 10/100 Layer 2 managed switch along with Gigabit uplinks
• Affordable, easy integration into existing network
• Fanless, quiet operation ideal for open space work environments

Gigabit uplinks:
the 2510-24 has two dual-personality ports for either 10/100/1000 or mini-GBIC connectivity; the 2510-48 has four Gigabit ports, which can all be used concurrently with two 10/100/1000 ports and two open mini-GBIC slots

 

• Managed Layer 2 feature set
• 24 or 48 10/100 or Gigabit ports
• Two mini-GBIC slots for fiber connectivity
• Quiet fanless design (J9019B)
• Industry leading lifetime warranty

 

Physical characteristics
Dimensions: 7.9 x 6.3 x 5.0 in. (20.07 x 16.0 x 12.7 cm)
Weight: 5.55 lb. (2.5 kg )

Electrical characteristics

    * Voltage: 100:127 VAC/200:240 VAC
    * Maximum Current: 8.2A/3.8A
    * Frequency range: 50/60 Hz

Notes
For additional RPS specification information, see the data sheet for the product in which the RPS is being installed.

Recommended with:
HP ProCurve Switch 4204 vl chassis (J8770A)
and
24x gigabit port module (J8768A)

Management

Uni-Directional Link Detection (UDLD):
monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices

Connectivity

ProCurve/IEEE Auto-MDIX:
automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports

Performance

Architecture:
up to 76.8 Gbps crossbar switching fabric provides wire-speed intra- and inter-module switching with up to 48 million pps throughput built on ProCurve custom-designed ASIC technology

Resiliency and high availability

IEEE 802.3ad Link Aggregation Control Protocol (LACP) and ProCurve trunking:
support up to 36 trunks, each with up to 8 links (ports) per trunk; trunking across modules is supported

IEEE 802.1s Multiple Spanning Tree Protocol:
provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol

Hot-swappable modules:
permit modules and mini-GBICs to be added or swapped without interrupting the network

Optional redundant power supply:
provides uninterrupted power; allows hot-swapping of one of the two supplies when installed

Layer 2 switching

VLAN support and tagging:
supports the IEEE 802.1Q (4,096 VLAN IDs) and 256 VLANs simultaneously

GARP VLAN Registration Protocol:
allows automatic learning and dynamic assignment of VLANs

Layer 3 routing

Basic IP routing:
enables automatic routing to the connected VLANs and up to 16 static routes--including one default route--in IP networks

Security

Port security:
allows access only to specified MAC addresses, which can be learned or specified by the administrator

MAC address lockout:
prevents configured particular MAC addresses from connecting to the network

Multiple user authentication methods:

IEEE 802.1X
  industry-standard way of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server

Web-based authentication
  similar to IEEE 802.1X, provides a browser-based environment to authenticate clients that do not support the IEEE 802.1X supplicant

MAC-based authentication
  client is authenticated with the RADIUS server based on client's MAC address

Authentication flexibility:

Multiple IEEE 802.1X users per port
  provides authentication of up to 8 IEEE 802.1X users per port; prevents user "piggybacking" on another user's IEEE 802.1X authentication

Secure FTP:
allows secure file transfer to/from the switch; protects against unwanted file downloads or unauthorized copying of switch configuration file

TACACS+:
eases switch management security administration by using a password authentication server

Source-port filtering:
allows only specified ports to communicate with each other

Secure Shell (SSHv2):
encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks

Secure Sockets Layer (SSL):
encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch

Switch management logon security:
can require either RADIUS or TACACS+ authentication for secure switch CLI logon

Custom banner:
displays security policy when users log in to the switch

BPDU port protection:
blocks Bridge Protocol Data Units (BPDU) on ports that do not require BPDUs, preventing forged BPDU attacks

Dynamic ARP protection:
blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or data theft of network data

Convergence

IP multicast (data-driven IGMPv3):
automatically prevents flooding of IP multicast traffic

IEEE 802.1AB Link Layer Discovery Protocol (LLDP):
automated device discovery protocol for easy mapping by network management applications

LLDP-MED (Media Endpoint Discovery):
a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones

Quality of Service (QoS)

Traffic prioritization (IEEE 802.1p):
allows real-time traffic classification into 8 priority levels mapped to 4 queues

Class of Service (CoS):
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), L3 protocol, TCP/UDP port number, source port, and DiffServ

Layer 4 prioritization:
enables prioritization based on TCP/UDP port numbers

Manageability

sFlow (RFC 3176):
wire-speed traffic accounting and monitoring

RMON and XRMON:
provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events

Friendly port names:
allow assignment of descriptive names to ports

Dual flash images:
provides independent primary and secondary OS files for backup while upgrading

Multiple configuration files:
allows a config file to be stored to flash image

Stacking capability:
single IP address management for a virtual stack of up to 16 switches, including the ProCurve 2500 series, 2510 series, 2600 series, 2800 series, 2810 series, 2900 series, 3400cl series, 3500yl series, 4200vl series, 6108, 6200yl-24G-mGBIC, and 6400cl series

Troubleshooting:
ingress/egress port monitoring enables network problem-solving

Find-Fix-and-Inform:
finds and fixes common network problems automatically, then informs administrator

Software updates:
free downloads from the Web

Recommended with:
Redundant Power Supply (J4839A)
and up to four
24x gigabit port modules (J8768A)

ProCurve Switch vl 24-Port Gig-T Module:
with 24 RJ-45 10/100/1000-T ports

Ports:
24 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T; 802.3u Type 100Base-TX; 802.3ab Type 1000Base-T)
IEEE Auto-MDIX: Yes
Duplex: half or full  
Connector: RJ-45

Physical characteristics:
Dimensions: 8.97 x 8 x 1.75 in. (22.78 x 20.32 x 4.45 cm)
Weight: 1.23 lb. (0.56 kg )

Cabling:
Type:

1000Base-T: Category 5 (5E or better recommended), 100 ? differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000Base-T

Recommended with:
HP ProCurve Switch 4204 vl chassis (J8770A)
and
Redundant Power Supply (J4839A)

• Managed Layer 2 feature set 24 or 48 Gigabit ports
• Two mini-GBIC slots for fiber connectivity
• Quiet fanless design (J9019B)
• Industry-leading lifetime warranty

 

ProCurve Switch 2810 series
- 10/100/1000 stackable in both 24, 48-port design
- Secure, high performance connectivity along with advanced traffic
  monitoring and prioritization
- Shallow form factor ideal for smaller wiring closets

Connectivity:
Dual-personality functionality: four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, -LH or 100-FX

Performance:
35.7 Mpps at 64 bytes (ProCurve 2810-24G) and 71.4 Mpps at 64 bytes (ProCurve Switch 2810-48G): ten times the bandwidth for low-latency throughput

ProCurve Switch 2810 series
- 10/100/1000 stackable in both 24, 48-port design
- Secure, high performance connectivity along with advanced traffic
  monitoring and prioritization
- Shallow form factor ideal for smaller wiring closets

Connectivity:
Dual-personality functionality: four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, -LH or 100-FX

Performance:
35.7 Mpps at 64 bytes (ProCurve 2810-24G) and 71.4 Mpps at 64 bytes (ProCurve Switch 2810-48G): ten times the bandwidth for low-latency throughput

2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.

• High-performance Gigabit access switch
• Four optional 10-Gigabit ports (CX4 and/or SFP+)
• IEEE 802.3af/802.3at functionality (PoE/PoE+)
• Layer 2 plus static IP and RIP IP Routing
• Lifetime warranty, sFlow, ACLs, and rate limiting